Jump to content
8BitRat Consoles
Chakan516

Chakan Amiibo Coins (ALL of dem) lol

Recommended Posts

DO NOT SELL THESE... FOR PERSONAL USE ONLY!

   These images contain trademarked material owned by Nintendo & it is illegal to sell these, especially if you are selling them with pirated Amiibo.  These are unofficial & only meant for personal use.

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

   First off, credit for many the original images goes to Random11, CompC, Simone, mramiibo, ColoredBerry, TiMeBoMb4u2, JACKLE_KAT, Hitokirikai, & Crash1987 from the gbatemp forum.  For the most part, I used their cards as a base for my coins unless text was in the way.  A big thank you to all the people listed for the awesome work & giving me the idea to put together these coins.

   I have been working on these off an on for a hot minute & finally had the time to fully rework all of them to my liking.

   At the bottom are all the images I used for the Amiibo coins along with the supply list / guide directly below.  The titles below are copied directly from the Amazon listings & will take you directly to the Amazon items you’ll need. The RED items were from Hobby Lobby / Walmart.

Materials Required:

 

Instructions:

  • Print the coins on the Photo Paper with the following settings:
    • Fit Picture to Frame
    • Photo Paper – Glossy
    • High Quality
  • While printing, punch out the 3x5 cards until you have one cut out for each of the coins you plan to make.
  • Stick the NFC tags onto the 3x5 punched paper & label each for which Amiibo it will correspond to.
  • Test each by verifying you can register it.
  • Use the Fiskars® SureCut to cut each line of coins to make it easier for punching them out.
  • Use the Fascola 1.5 to punch out each side of the coin.
  • Apply the stick glue to either side of the 3x5 cut outs & sandwich it between the front & back sides of the printed coins.
  • Place the glued coins under a heavy flat object to ensure it dries flat & doesn’t “wave”.
  • Retest each again.
  • Place them within the coin capsules & ENJOY.

 

If you see anything incorrect on the coins, please comment below & I’ll upload the corrected files.

722060963_AmiiboCoins--1-12.thumb.jpg.de0d4c392f458c816e52d6d33e7d4bab.jpg868531042_AmiiboCoins--13-24.thumb.jpg.613f9c7eb079931bed27991dba8e99af.jpg121076562_AmiiboCoins--25-36.thumb.jpg.f5ab30149d030f87c3690f7df1c8b91e.jpg145643458_AmiiboCoins--37-48.thumb.jpg.0bb77986a35edbcd7629450a8f3ccbc1.jpg77831877_AmiiboCoins--49-60.thumb.jpg.b66fdb65784312a61507cebd9665c6ed.jpg1437523561_AmiiboCoins--61-72.thumb.jpg.f11395c091c6a0b0c106bcf4a8e2764d.jpg2075745814_AmiiboCoins--73-84.thumb.jpg.fcb420c4385aeb3b541466340bfb0e05.jpg1876607703_AmiiboCoins--85-96.thumb.jpg.385ff4f419fdcbac747c32c296193bc5.jpg325915809_AmiiboCoins--97-108.thumb.jpg.41f7d1609ddbe692855d5e76f626dadb.jpg1738228934_AmiiboCoins--109-120.thumb.jpg.4999e9109ee622b341bc9071a5cd72e1.jpg1433793770_AmiiboCoins--121-132.thumb.jpg.247b6cac5da565b58029d08fa932c8c0.jpg1529028627_AmiiboCoins--133-144.thumb.jpg.4c8a2e61dc492de1bec67eb85ecdefe7.jpg2020725627_AmiiboCoins--145-156.thumb.jpg.9a90e006791382e07112dbc50d01cdb6.jpg1305408631_AmiiboCoins--157-168.thumb.jpg.b9860006939b7c4862dffbd2b984ab16.jpg1229000309_AmiiboCoins--169-180.thumb.jpg.b2965625a2d0499b4ed73da6219c0da5.jpg2102920442_AmiiboCoins--181-192.thumb.jpg.6934534d2d8827e4e2fd4a4c31633139.jpg1609437777_AmiiboCoins--JapanExclusive.thumb.jpg.3b4d812963c5f23c2d61ab15332ca28b.jpg2058235570_AmiiboCoins--Non-OfficiallyListed.thumb.jpg.d42195e619d5b7df44265e4a4efc5097.jpg

The original PND files can be found under downloads at the following link:

 

27 MARCH 2019

***Updated sheet 157-168 -- Loot Goblin & (Orange) Inkling

 

02 OCTOBER 2019

***Updated sheet 169-180 -- Link & Incineroar

***Updated sheet 180-192 -- Chrom, Richter, & Dark Samus

 

Share this post


Link to post
Share on other sites
On 5/14/2019 at 9:25 PM, Grim_Guardian said:

I bought 30mm coin protectors, and a 1.5" paper cutter...but those 2 don't fit together??

https://i.imgur.com/POgyjhV.jpg?1

These Chakan Coin images are around 1.5" wide, which is 38.1mm wide. Therefore 30mm is too small for the cases. From what I gather, you actually need 40mm coin protectors.

Something like these 40mm cases should work: https://www.amazon.com/gp/product/B07CQQ4S81

Hope this helps! Also, big thank you to Chakan516 for making these.

Share this post


Link to post
Share on other sites
On 5/23/2019 at 3:41 PM, Omnipotent said:

These Chakan Coin images are around 1.5" wide, which is 38.1mm wide. Therefore 30mm is too small for the cases. From what I gather, you actually need 40mm coin protectors.

Something like these 40mm cases should work: https://www.amazon.com/gp/product/B07CQQ4S81

Hope this helps! Also, big thank you to Chakan516 for making these.

Thank you for the awesome cases....  I might have to give those a run at some point.

Just FYI, once you trim them with the 1.5 inch Fascola craft punch they will fit just about perfectly.  These were made slightly larger than the coin capsules so you don't have to cut them perfectly when punching them out.

 

On 5/15/2019 at 12:25 AM, Grim_Guardian said:

I bought 30mm coin protectors, and a 1.5" paper cutter...but those 2 don't fit together??

https://i.imgur.com/POgyjhV.jpg?1

 See above reply, I hope this helps.  If not, feel free to comment below and I'll try to get back with you as soon as I can.

Share this post


Link to post
Share on other sites

Is it possible to edit the images to be around 30mm? If so what program should I use to do it?, I also got the 30mm coin protectors.

Share this post


Link to post
Share on other sites
On 7/24/2019 at 11:32 PM, Gasaraki said:

Is it possible to edit the images to be around 30mm? If so what program should I use to do it?, I also got the 30mm coin protectors.

Sorry this took so long to reply but I used a mix of GIMP & Paint.Net to make the originals.   Just a FYI, these were made slightly larger than 30mm so you don't have to punch them perfectly when punching them out but if you want to work with the original pnd files, they can be found under the downloads tab at the top or the link in the OP.  I will also be updating the upload in the not so distant future with the new Amiibos coming out.

Share this post


Link to post
Share on other sites

One issue that just hit me is that a lot of people appear to be ordering coin cases that have a outside diameter of 30mm...  The ones I ordered have a outside diameter of 44.45mm & a inside diameter of 30mm.  See image attached for specs on the coin cases I ordered.

 

1533246947_Screenshot_20190809-204040_AmazonShopping.thumb.jpg.34d4c366790a8c01e24fd37fbe5e858e.jpg

Share this post


Link to post
Share on other sites
On 9/21/2019 at 9:33 AM, therealdhs said:

Any eta on a pic for the links awakening amiibo?

I second this, it'd be amazing!

On 5/14/2019 at 10:25 PM, Grim_Guardian said:

I bought 30mm coin protectors, and a 1.5" paper cutter...but those 2 don't fit together??

https://i.imgur.com/POgyjhV.jpg?1

I ended up buying 30mm coin protectors and a 1.25" circle punch, as I wanted smaller coins.  Then using the paint.net program, I flattened the images I downloaded from this site, then adjusted the size on the image to about 17.11cm long by 22.14cm high, this got the images, when punched, to fill the 1.25" inch circle punch, with little to no whitespace around the edges. The downside is that only fits the front of the coin, so if you want to fit the back into the bottom with the foam in between, you'll have to cut that down further, I think on mine I just trimmed the black circles off, then it fit okay.

Share this post


Link to post
Share on other sites
On 9/21/2019 at 11:33 AM, therealdhs said:

Any eta on a pic for the links awakening amiibo?

 

On 9/30/2019 at 2:21 PM, ShoelessBobSD said:

I second this, it'd be amazing!

I ended up buying 30mm coin protectors and a 1.25" circle punch, as I wanted smaller coins.  Then using the paint.net program, I flattened the images I downloaded from this site, then adjusted the size on the image to about 17.11cm long by 22.14cm high, this got the images, when punched, to fill the 1.25" inch circle punch, with little to no whitespace around the edges. The downside is that only fits the front of the coin, so if you want to fit the back into the bottom with the foam in between, you'll have to cut that down further, I think on mine I just trimmed the black circles off, then it fit okay.

 

These will be uploaded very soon & will include Incineroar, Chrom, Richter, & Dark Samus.  (The PSD files are being uploaded now on the downloads page)  Been out of the loop for a while but now that WoW Classic has let me go I'm back to my old hobbies lol

Share this post


Link to post
Share on other sites
2 hours ago, Chakan516 said:

And they're all uploaded along with this post being updated.

Perfect timing!  I'm still putting mine together.  Thanks so much for that, they're awesome

 

Share this post


Link to post
Share on other sites
On 10/2/2019 at 5:59 PM, ShoelessBobSD said:

Perfect timing!  I'm still putting mine together.  Thanks so much for that, they're awesome

 

Thanks.  I was thinking of hitting the Animal Crossing cards too but I'm really not sure if it would be worth the work with the huge number of them out & the fact that they don't really have much use outside of Animal Crossing.  I was also thinking of making a set of either Young Link or maybe Pokemon Trainer along these lines.  Each with a spiffy logo cover for the restaurant instead of displaying the Amiibo.

FB_IMG_1570119289110.thumb.jpg.6c735f2fcbee849861f21eb881ac21ac.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...